In the world of wireless connectivity, WiFi compatibility issues can be a frustrating roadblock. One common solution that often gets overlooked is adjusting the channel width to 20MHz. This simple tweak can sometimes make a significant difference in improving stability and performance. In this blog post, we’ll explore why changing the channel width to 20MHz
How to Fix WiFi Compatibility issue in Home Network Read More »
Issue Assessment Windows 10 Client with Domain User/Computer certificate Window Server 2022 with NPS role installed, network policy configured with “Smart Card or Certificate” authentication (802.1x) 2 tiers Root CA setup: 1x Offline Root CA and 1x Subordinate Root CA Windows 10 Client error “Cannot connect to this network”, Event Viewer log as below NPS
How to Fix NPS Issue that Caused by Root CA CRL Read More »
Environment Forti AP U431F – WiFi 6/AX enabled access points FortiGate Firewall is used as Wireless Controller to upgrade the firmware for Forti AP FortiGate Firewall and Forti AP are on different VLAN/Networks DHCP Option 138 is configured on Windows Server 2022 to point to the FortiGate (Wireless Controller) address Issue Solution Go to the
How to Fix Forti AP Rebooting Loop – Fail to Write the Image Read More »
Environment Forti AP U431F – WiFi 6/AX enabled access points FortiGate Firewall is used as Wireless Controller FortiGate Firewall and Forti AP are on different VLAN/Networks. DHCP Option 138 is configured on Windows Server 2022 to point to the FortiGate (Wireless Controller) address Error You can see the Image ID is “MERU SECONDARY“ Solution You
How to Fix Forti AP boot loop – Wrong Image Read More »
This post is to document the process of configuring Guest WIFI using Cisco Wireless LAN Controller (WLC), ideally you would configure a Anchor WLC in a DMZ and use EoIP tunnel to send all guest traffic to anchor controller. However, in this example, we only have a HA pair of WLC without the luxury of
How to Configure Guest WIFI Using Cisco Wireless LAN Controller (WLC) Read More »
This post is to demonstrate the process to configure VLAN Trunking with Ubiquiti AirMax GigaBeam Point to Point device. Unlike Ubiquiti Nano stations, those AirMax GigaBeam (GBE-LR) does NOT need to configure VLANs or Bridge etc for the trunk port to work. If you want to check VLAN Trunking configuration with Nanostation devices, see below
AirMax GigaBeam – How to Configure VLAN Trunking Read More »
This post is to list out the procedures of migrating Ubiquiti Unifi to Cisco Meraki wireless, this includes the common configuration of WLAN and SSID, Radius configuration with Microsoft NPS on Server 2022, and troubleshooting tips when you experience problems. For detailed Microsoft NPS installation and configuration, please check the previous posts: How to Migrate
How to Migrate Ubiquiti Unifi to Cisco Meraki Wireless Read More »
This post is to demonstrate the steps of configuring Radius Authentication / NPS Server 2022 with Ubiquiti Wireless. Note: For the basic installation process of the Network Policy Server, please check the previous post, it was on Server 2019 but the installation procedure is the same, this time you do NOT need to run the
How to Configure RADIUS Authentication / NPS Server 2022 with Ubiquiti Read More »
Object This post will list out the step-by-step procedure to migrate the NPS role from server 2016 to server 2019. Environment The source server is Windows Server 2016 standard The destination is Windows Server 2019 standard Install NPS role on the destination server 2019 1. Go to Server Manager and click “Add Roles and Features”
How to Migrate Microsoft NPS to Server 2019 Read More »
Object This post is to show you the way to configure VLANs on Ubiquiti Nanostation and demonstrate how to trunk the VLANs using over Point to Point Wireless. Ubiquiti Nanastations are very commonly used by customers when it is not feasible to connect two locations via fibre or the physical distance is over 100M for
Ubiquiti Nanostation – How to Configure VLAN Trunking Read More »
