This post is about cofiguring Trunk port between Meraki and Cisco Catalyst switch. Similar “cross-vendor” trunk port configuation from another post: Standard Trunk Port Configuration Meraki side Cisco Side LACP Etherchannel Configuration Meraki Side Cisco Side Useful link https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports
How to Configure Trunk Port between Meraki and Cisco Catalyst Switch Read More »
This post is to list out the compatible configuration to allow default VLAN1 traffic between Cisco and Juniper. In this post, let’s assume VLAN1 are used for Switch Management, yes it is bad practice 🙁 Single Connection Between Cisco and Juniper Cisco Juniper Please define your VLAN 1 as native vlan on the Juniper side:
How to Allow Default VLAN1 Traffic between Cisco and Juniper Read More »
This post is about configuring LACP between FS and Cisco Switches. Environment * FS Switch end * Cisco Switch end * 4x 10G connection in between FS switch configuration ====Change the port speed to 10G as our Cisco 9300 can only support 10G ====Configure the LACP Cisco Switch configuration LACP status Useful links https://www.cisco.com/c/en/us/td/docs/ios/12_2sb/feature/guide/gigeth.html https://resource.fs.com/mall/file/user_manual/s5860-20sq-and-s5860-24xb-u-switches-configuration-guide.pdf
How to Configure LACP between FS and Cisco Read More »
This post is about configuring LACP between Juniper QFX (EVPN-VXLAN design) and VMware ESXi hosts. Environment *2x Juniper QFX 5120 Switches configured with EVPN-VXLAN, the design is a Collapsed Spine Fabric as described below: https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/task/configuration/collapsed-spine-fabric-cloud-dc-configuring.html *If you connect your ESXi hosts directly to the QFX switches, you have to use LACP in between as this
How to Connect Juniper QFX EVPN-VXLAN and VMware ESXi using LACP Read More »
Object We recently purchased a couple of FS.com S5810 switches, after some testing, troubleshooting, we get them working and this post is to document the configurations conducted during the process. Configuration examples such as Virtual Switch Link, LACP, DHCP server, etc may help some people if you are struggling. Those Switches’ CLI is very much
How to configure FS S5810 switch stacking LACP DHCP Read More »
Object When it is coming to project execution and solution integration, ICT network professionals always have the challenge to interconnect multiple vendors together, it is not difficult but painful to deal with. This article is to show you the typical EtherChannel configuration examples when you try to interconnect them across multiple vendors: Cisco and Juniper
How to Configure Cisco Juniper Fortinet EtherChannel LACP Read More »
